2023-01-10
How to Operate a Manual Pallet Jack?Manual pallet jacks are simpler and more affordable than electric pallet jacks, and also require less up keep. They can be a good choice for small to mid-sized warehouses or construction sites. Here are the four simple steps for using a manual pallet jack.1. Find Read More
2023-01-05
Heavy duty weld on hooks are designed for axial loading and allow fixed anchor points to be added where required, for example on farm machinery, spreader beams, and so on. Each weld on hook is supplied with full welding instructions, which must be followed.Before welding, thoroughly clean the weldin Read More
2022-12-23
Hand winches are operated by a ratcheting crank or ratcheting lever that winds the cable onto the cable spool as the winch pulls a load. The ratchet prevents kickbacks when the winch is under load. Read More
2022-12-12
In the process of lifting and handling, the use of magnetic lifter is becoming more and more extensive, and how to use the magnetic lifter correctly has become particularly important. How to correct to use the magnetic lifter? Some tips to use the lifting magnet. Read More
2022-11-16
The jack cannot be lifted or cannot be lifted to a high heightSolution: 1) Check whether the oil drain valve is completely closed (whether the handle of the oil drain valve is fully tightened).2) Tighten the oil drain handle and loosen it half a turn, press the handle more to discharge the air.3) D Read More
2022-11-09
What Is Bridge Fitting?Container bridge fittings are used to safely connect shipping containers. These heavy-duty fittings keep shipping containers together, combining their weight so they’re harder to move, spill, or tip in transit.The bridge fitting clamps are designed to safely and securely conne Read More
2022-11-07
Powder Painting and spray Painting are both a surface treatment process.Then What is the difference between powder painting and spray painting?1. Powder PaintingPowder Painting is a surface treatment method of spraying plastic powder on parts. Its working principle is:The plastic powder is charged t Read More
2022-10-18
SAFE HANDLING OF PLATE CLAMPLIFTING PLATE CLAMP used for different applications should be stored in separate places. LIFTING PLATE CLAMP should always be stored indoors never leave them exposed to the elements.It will be more convenient if you put colored markings or a specific number of lines on ea Read More
2022-10-12
1. Always work within the SWL of your slings. Increasing the angle between the sling legs reduces the lifting capacity. Always consult your Lifting Chart.2. Never use damaged slings.3. Do not, under any circumstances, tie knots in the sling – this will result in loss of strength and sling damage.4 Read More