First of all, the appearance of the lifting chain should be checked: the inspection should focus on whether the link pieces of the chain are deformed and cracked, and whether there is embroidery rot. Check whether the rollers are worn, damaged, missing, etc. In addition, you should also p Read More

Why is stainless steel magnetic? Most products are non-magnetic, and some stainless steel products will generate working magnetism during the production process, such as stainless steel wire rope, all non-magnetic to judge stainless steel is unscientific. Because of the fluctuation of chemical compo Read More

From the appearance, the two types of lifting chains are basically silver-white. In terms of performance, both types of lifting chains have good corrosion resistance and rust resistance. There seems to be no difference, but in fact there is a big difference in essence. Read More

How to Maintain the Ratcheting MechanismKeep the mechanism clean by keeping it away from dirt and debris or by using a small brush to remove any that managed to get on or inside it.It is also essential to use the light oil or WD-40 to lubricate the moving parts of ratcheting mechanism’s handle. This Read More

Label & Marking requirements BSEN 12195-2:2001Label Read More

Pre-operational checksVisually inspect the truck for damage or cracks.Raise the forks to check the hydraulic pump is in working order by pressing the lever downwards then operate the handle. Raise forks fully and look for any sign of hydraulic oil leaking.How to operate the truck safelyBefore enteri Read More

What is the turnbuckle? Read More

1. The users of the lifting ring screw must be trained before using the product. The main purpose is to use the product correctly and ensure safety;2. In different occasions and different application scenarios, it is necessary to reasonably select the correct type, grade and length of lifting eye sc Read More

GENERAL SAFETY INSTRUCTIONS ■ Check the clamp before use – do not use a defective plate clamp. ■ Ensure that the clamps are suitable for the thickness of plate to be lifted. ■ Never exceed the maximum or minimum thickness for which the clamps are designed.■ Put the clamp onto the plate as far as it Read More

Requirements for handling tanks1. Ensure that the distance between the center of gravity of the object to be moved and the two adjacent small tanks is large (to ensure the stability of the object to be moved). Multiple combination methods can be selected according to the actual situation.For example Read More