Availability: | |
---|---|
Quantity: | |
.The TCH horizontal plate clamps have been specifically designed to be used in pairs for transportation of plate bundles as well as single plates with a minimum thickness of 5mm
.A pair of clamps used with a two legged chain sling are suitable for small plates up to 1500mm in length. It is recommended to use two pairs in conjunction with a spreader beam for handling of larger plates. These units are supplied as standard with a smooth jaw. There is also the option of hardened steel teeth for special applications.
.Do not side load TCH clamp
.Do not use on a quad sling, when lifting long plates, use a beam or spreader bar that has a double leg slings at each end and connect clamp to the slings
.The top angle between the chain/rope legs must not exceed 45 degree from vertical
SIZE(T) | JAW OPENING(MM) | LOAD CAPACITY(KG) | A | B | C | D | E | WEIGHT(KG) |
1 | 5-32 | 1000 | 245 | 110 | 44 | 100 | 32 | 6 |
2 | 5-32 | 2000 | 220 | 88 | 73 | 100 | 50 | 5.4 |
4 | 5-50 | 4000 | 265 | 118 | 92 | 100 | 64 | 10 |
6 | 5-75 | 6000 | 350 | 172 | 130 | 130 | 90 | 24.5 |
8 | 5-75 | 8000 | 350 | 172 | 130 | 130 | 90 | 26.5 |
10 | 5-100 | 10000 | 470 | 215 | 130 | 150 | 114 | 48 |
10L | 50-150 | 10000 | 510 | 215 | 130 | 150 | 114 | 52 |
.The TCH horizontal plate clamps have been specifically designed to be used in pairs for transportation of plate bundles as well as single plates with a minimum thickness of 5mm
.A pair of clamps used with a two legged chain sling are suitable for small plates up to 1500mm in length. It is recommended to use two pairs in conjunction with a spreader beam for handling of larger plates. These units are supplied as standard with a smooth jaw. There is also the option of hardened steel teeth for special applications.
.Do not side load TCH clamp
.Do not use on a quad sling, when lifting long plates, use a beam or spreader bar that has a double leg slings at each end and connect clamp to the slings
.The top angle between the chain/rope legs must not exceed 45 degree from vertical
SIZE(T) | JAW OPENING(MM) | LOAD CAPACITY(KG) | A | B | C | D | E | WEIGHT(KG) |
1 | 5-32 | 1000 | 245 | 110 | 44 | 100 | 32 | 6 |
2 | 5-32 | 2000 | 220 | 88 | 73 | 100 | 50 | 5.4 |
4 | 5-50 | 4000 | 265 | 118 | 92 | 100 | 64 | 10 |
6 | 5-75 | 6000 | 350 | 172 | 130 | 130 | 90 | 24.5 |
8 | 5-75 | 8000 | 350 | 172 | 130 | 130 | 90 | 26.5 |
10 | 5-100 | 10000 | 470 | 215 | 130 | 150 | 114 | 48 |
10L | 50-150 | 10000 | 510 | 215 | 130 | 150 | 114 | 52 |