Camouflage Ratchet Tie Down Straps/ratchet Straps for Car

Camouflage Ratchet tie down/Camouflage ratchet straps

Width:25mm-100mm

Length: Request

Metal fittings: S hook/double J hook/Claw hook/close hook/u hook

Color: Camouflage

Logo: Customized

HOW TO USE

1. Thread the strap from one end of the mandrel opposite the ergonomic

2. Pull out the proper length from the other side

3. Unlock and pump the up-and-downs device to roll and tighten the strap

4. Lock the device when it's fixed and tightened

Adjust Or Release The Ratchet Tie Down Strap

1. Unlock the device till it's like 180-degree straight

2. Lift the iron sheet under the spring firmly and press it to the other side

3. Grasp the ratchet tightly, and then forcefully pull the lower strap outward with the other hand

4. Readjust or release done

Warning

1. Do not use the ratchet strap for lifting.
2. Do not use the damaged Ratchet strap.
3. Do not use overload.
4. Do not use the webbing knot
5. Do not wring or twist the ratchet strap.
6. Keep the webbing away from sharp or abrasive edges
7. Periodic Inspect the ratchet strap to ensure the be-down or webbing in good condition, or replace the ratchet strap at once.

NOTE: All Ratchet strap, must come with a label indicating size, maximum load, and WLL(working load limited). Remember, the WLL Is not the maximum load, always use the WLL when selecting ratchet strap. It Is the responsibility of the user to determine the number of straps needed to secure his load safety based on the WLL rule.