Availability: | |
---|---|
Quantity: | |
. For vertical lifting and transporting of steel plates and structures
.CDE lifting clamps are equipped with a pre-tension mechanisms ensuring the clamp does not slip when lifting force is applied and when load is being lowered
.The clamp is locked in closed as well as in open position
.Minimum WLL is 10% of the Maximum WLL
.Do not side load clamp more than 15° for side loading
.Do not lift plates with a temperature greater than 100℃
.Do not use to lift stainless steel, lead or copper
.Do not use on a double, triple, or quad sling. When using two clamps to lift a steel plate, a lifting team must be used between the two clamps, so the clamps operate in a vertical position.
.The plate surface of the material must have a hardness lever below HRC30/Brinell 300
SIZE(T) | JAW OPENING(MM) | LOAD CAPACITY(KG) | T | U | V | L | WEIGHT(KG) |
0.5 | 0-15 | 500 | 205 | 30 | 105 | 48 | 1.75 |
1 | 0-20 | 1000 | 210 | 35 | 102 | 55 | 2 |
2 | 0-25 | 2000 | 270 | 40 | 140 | 75 | 5.1 |
3.2 | 0-30 | 3200 | 425 | 75 | 215 | 102 | 13.6 |
5 | 0-50 | 5000 | 480 | 80 | 232 | 112 | 19.5 |
8 | 0-45 | 8000 | 600 | 88 | 290 | 125 | 34 |
12 | 50-90 | 12000 | 700 | 90 | 420 | 128 | 50 |
16 | 60-100 | 16000 | 710 | 100 | 445 | 128 | 65 |
20 | 0-80 | 20000 | 948 | 100 | 563 | 140 | 160 |
30 | 10-90 | 30000 | 944 | 100 | 568 | 142 | 167 |
. For vertical lifting and transporting of steel plates and structures
.CDE lifting clamps are equipped with a pre-tension mechanisms ensuring the clamp does not slip when lifting force is applied and when load is being lowered
.The clamp is locked in closed as well as in open position
.Minimum WLL is 10% of the Maximum WLL
.Do not side load clamp more than 15° for side loading
.Do not lift plates with a temperature greater than 100℃
.Do not use to lift stainless steel, lead or copper
.Do not use on a double, triple, or quad sling. When using two clamps to lift a steel plate, a lifting team must be used between the two clamps, so the clamps operate in a vertical position.
.The plate surface of the material must have a hardness lever below HRC30/Brinell 300
SIZE(T) | JAW OPENING(MM) | LOAD CAPACITY(KG) | T | U | V | L | WEIGHT(KG) |
0.5 | 0-15 | 500 | 205 | 30 | 105 | 48 | 1.75 |
1 | 0-20 | 1000 | 210 | 35 | 102 | 55 | 2 |
2 | 0-25 | 2000 | 270 | 40 | 140 | 75 | 5.1 |
3.2 | 0-30 | 3200 | 425 | 75 | 215 | 102 | 13.6 |
5 | 0-50 | 5000 | 480 | 80 | 232 | 112 | 19.5 |
8 | 0-45 | 8000 | 600 | 88 | 290 | 125 | 34 |
12 | 50-90 | 12000 | 700 | 90 | 420 | 128 | 50 |
16 | 60-100 | 16000 | 710 | 100 | 445 | 128 | 65 |
20 | 0-80 | 20000 | 948 | 100 | 563 | 140 | 160 |
30 | 10-90 | 30000 | 944 | 100 | 568 | 142 | 167 |